ㄟ都...這一篇其實有點算充文章的，相關資訊是從官網那邊轉錄，
恩...就算指令完全支援，不代表所有型號都能支援啊...（Sky曰：但也夠用了啦！）
但如果只是貼上那多沒意思，會附上圖示來說明，
以免再插介面卡的時候差錯，或者明明插好了，但卻弄錯編號...（我還蠻常的...XD）
PS：這邊就要借用一下PacketTracer4軟體的圖了...^^"
Cisco成功（賺錢）的地方在於它的模組化設計，今天假設買了3640的router，
但想要提升功能時，可以不用再買一台新的，而是用類似「插卡」的方式來提升其功能，
例如今天fastEthernet的接頭都滿了，只要添購該介面卡就可以了~~
而其又有分為Slot和WIC slot，怎麼分？
好問題啊...基本上比較大的洞就是slot...因為一塊slot中，可以另外包含多塊WIC slot，
恩...講這麼多請看以下示意圖就知道...^^
由圖可以看出，這台router有一個slot和二個WIC slot，擴充後可以變成...↓
【把slot補滿成為一個新介面】
或者也可以把一個slot變成多個WIC slot~（如3640就沒有WIC slot，只有slot）
至於Dynagen本身支援的型號和介面卡型式，以下是從官網轉錄並整理一下...^^
資料來源：http://dynagen.org/tutorial.htm
Hardware Currently Emulated
Stolen Borrowed from ggee's excellent post on Hacki's forum:
======================1700s======================
Slots: 0 (available)
WIC slots: 0
CISCO1710-MB-1FE-1E (1 FastEthernet port and 1 Ethernet port, automatically used)
Note, interfaces do not use a slot designation (e.g. "f0")
Note, interfaces do not use a slot designation (e.g. "f0")
Note, interfaces do not use a slot designation (e.g. "f0")
Note, interfaces do not use a slot designation (e.g. "f0")
Slots: 0 (available)
WIC slots: 2
C1700-MB-1ETH (1 FastEthernet port, automatically used)
Cards:
- WIC-1T (1 Serial port)
- WIC-2T (2 Serial ports)
- WIC-1ENET (1 Ethernet ports)
======================2600s======================
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1E (1 Ethernet port, automatically used)
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2E (2 Ethernet ports, automatically used)
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1 FastEthernet port, automatically used)
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2 FastEthernet ports, automatically used)
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1 FastEthernet port, automatically used)
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2 FastEthernet ports, automatically used)
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1 FastEthernet port, automatically used)
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2 FastEthernet ports, automatically used)
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1 FastEthernet port, automatically used)
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2 FastEthernet ports, automatically used)
Cards:
- NM-1E (Ethernet, 1 port)
- NM-4E (Ethernet, 4 ports)
- NM-1FE-TX (FastEthernet, 1 port)
- NM-16ESW (Ethernet switch module, 16 ports)
- NM-NAM
- NM-IDS
- WIC-1T (1 Serial port)
- WIC-2T (2 Serial ports)
======================3600s======================
Slots: 6 (available)
Slots: 4
Slots: 2
Cards:
- NM-1E (Ethernet, 1 port)
- NM-4E (Ethernet, 4 ports)
- NM-1FE-TX (FastEthernet, 1 port)
- NM-16ESW (Ethernet switch module, 16 ports)
- NM-4T (Serial, 4 ports)
- Leopard-2FE (Cisco 3660 FastEthernet in slot 0, automatically used)
======================3700s======================
2691 (The 2691 is essentially a 3700 with 1 slot)
Slots: 1 (available)
WIC slots: 3
Slots: 2 (available)
WIC slots: 3
Slots: 4 (available)
WIC slots: 3
Cards:
- NM-1FE-TX (FastEthernet, 1 port)
- NM-4T (Serial, 4 ports)
- NM-16ESW (Ethernet switch module, 16 ports)
- GT96100-FE (2 integrated ports, automatically used)
- NM-NAM
- NM-IDS
- WIC-1T (1 Serial port)
- WIC-2T (2 Serial ports)
======================7200s======================
Slots: 6 (available)
Chassis types:
- STD
- VXR
NPEs:
- NPE-100
- NPE-150
- NPE-175
- NPE-200
- NPE-225
- NPE-300
- NPE-400
- NPE-G2 (Requires the use of NPE-G2 IOS images)
Cards:
- C7200-IO-FE (FastEthernet, slot 0 only)
- C7200-IO-2FE (FastEthernet, 2 ports, slot 0 only)
- C7200-IO-GE-E (GigabitEthernet interface only, Ethernet not currently functional, slot 0 only)
- PA-FE-TX (FastEthernet)
- PA-2FE-TX (FastEthernet, 2 ports)
- PA-4E (Ethernet, 4 ports)
- PA-8E (Ethernet, 8 ports)
- PA-4T+ (Serial, 4 ports)
- PA-8T (Serial, 8 ports)
- PA-A1 (ATM)
- PA-POS-OC3 (POS)
- PA-GE (GigabitEthernet)
至於怎麼用文字去安插新的介面裝置，就請看下一篇囉！
留言列表
電腦類 (6)
